ASSEMBLY
Make Assembly Easier
Everything in this manual is designed to ensure that the weight bench can be assembled suc- cessfully by anyone. Most people find that set- ting aside plenty of time helps assembly go smoothly.
To hire an authorized service technician to assemble the weight bench, call
Before beginning assembly, carefully read the following information and instructions:
•Because of its weight and size, the weight bench should be assembled in the location where it will be used. Make sure that there is enough clear- ance to walk around the weight bench as you assemble it.
•Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.
•Tighten all parts as you assemble them, unless instructed to do otherwise.
•As you assemble the weight bench, make sure all parts are oriented as shown in the drawings.
•Assembly requires two people.
•For help identifying small parts, use the PART IDENTIFICATION CHART on page 5.
The included grease, and the following tools (not included) may be required for assembly:
• Two adjustable wrenches
• One rubber mallet
• One standard screwdriver
• One Phillips screwdriver
• Clear tape or masking tape
Assembly will be more convenient if you have a socket set, a set of
1.
Before beginning assembly, make sure you understand the information in the box above. For help identifying small parts, use the PART IDENTIFICATION CHART on page 5.
Attach the Rear Stabilizer (2) to the Frame (1) with two M10 x 81mm Bolts (100), two M10 Washers (96), and two M10 Nylon Locknuts (94).
Do not tighten the Nylon Locknuts yet.
2.Attach the Front Stabilizer (3) to the Front Leg (4) with two M10 x 73mm Bolts (101), four M10 Washers (96), and two M10 Nylon Locknuts (94).
Do not tighten the Nylon Locknuts yet.
1 |
|
|
1 | 94 |
|
|
| |
|
| 2 |
| 94 | 100 |
|
| 96 |
2 |
|
|
|
| 4 |
|
| 94 |
| 94 |
|
| 96 | 96 |
| 101 | 101 |
|
| 3 |
7
