16.Press a 60mm x 60mm Square Inner Cap (9) into each end of the Left Top Frame (13). Place the Left Top frame onto the Uprights on the left side of the cage, so the welded brackets on the Top Frame fit inside the Uprights.
Press a 60mm x 60mm Square Inner Cap (9) into each end of the Right Top Frame (29). Place the Right Top Frame onto the Uprights on the right side of the cage, so the welded brackets on the Top Frame fit inside the Uprights.
17.Attach the Left Top Frame (13) to the left Front Upright (1) with two M10 x 78mm Bolts (33), four M10 Washers (6) and two M10 Nylon Locknuts (11). Note:
Do not tighten the Nylon Locknuts yet.
Attach the Right Top Frame (29) to the right Front Upright (1) with two M10 x 78mm Bolts (33), four M10 Washers (6) and two M10 Nylon Locknuts (11). Note:
Do not tighten the Nylon Locknuts yet.
16 |
|
| 9 |
29 |
|
| 9 |
| 13 |
9 |
|
9 |
|
17 | 33 |
| 6 |
29 | 6 |
33 |
|
6 | 11 |
| |
11 |
|
6 | 13 |
| |
11 | 6 |
1 | 6 |
| 33 |
| 33 |
| 1 |
11
