SEAT ASSEMBLY
25.Press a 1 1/2” Square Inner Cap (32) into the Leg Lever (29).
Lubricate the 5/16” x 2 1/4” Bolt (33). Attach the Leg Lever (29) to the Seat Frame (36) with the 5/16” x 2 1/4” Bolt and a 5/16” Nylon Locknut (3).
Insert the 3/8” x 2” Eyebolt (35) into the Leg Lever (29) from the direction shown. Tighten a 3/8” Nylon Locknut (21) with a 3/8” Washer
(9)onto the Eyebolt.
26.Rest the Seat Frame (36) on the indicated pin in the Front Upright (42). Attach the Seat Frame to the Front Upright with a 5/16” x
2 3/4” Carriage Bolt (14) and the Seat Knob
27.Press 3/4” Round Inner Caps (34) into the ends of both 12 1/2” Pad Tubes (28).
Insert one 12 1/2” Pad Tube (28) into the Seat Frame (36). Slide a 5 1/2” Pad (30) onto each end of the Pad Tube.
Insert the other 12 1/2” Pad Tube (28) into the Leg Lever (29). Slide a 5 1/2” Pad (30) onto each end of the Pad Tube.
15
25 |
|
| 36 |
3 | |
| |
| 29 |
35 | 8 |
| |
32 | 3 |
26 |
|
40 |
|
| 36 |
14 |
|
Pin |
|
42 |
|
27 |
|
| 34 |
36 | 30 |
| |
| 28 |
29 |
|
30 |
|
| 34 |
