Weider WESY17011 user manual Bolt and the Nylon Locknut are tight

14. Locate the Long “U”-Bracket (57) that is pre-	14
assembled with a 90mm Pulley (15) and a Cable
Trap (not shown). Route the Long Cable (58)
around the Pulley and through the Long “U”-
Bracket. Be sure that the Cable is in the
groove of the Pulley, that the Cable Trap is		15
turned to hold the Cable in place, and that the			58
Cable and Pulley move smoothly.
			57
15. Route the Long Cable (58) around a 90mm Pulley	15			58	15
(15). Using an M10 x 45mm Bolt (12) and an M10		55
					12
Nylon Locknut (21), secure the Pulley to the indi-			Bracket
cated bracket on the Top Frame (55). Be sure
that the Cable is in the groove of the Pulley
and that the Cable and Pulley move smoothly.
			21
16. Attach the Long Cable (58) to the Weight	16
Carriage (19) with an M10 x 20mm Bolt (69) and
an M10 Nylon Locknut (21). Make sure that the
Bolt and the Nylon Locknut are tight.
			58
	21		69
	19
	10