Weider WESY17011 manual

M10 x 20mm Bolt (69)

M10 x 45mm Bolt (12)

M10 x 60mm Bolt (7)

M8 x 67mm Bolt (61)

M8 x 67mm Carriage Bolt (14)

M8 x 70mm Bolt (11)

M10 x 80mm Bolt (25)

M10 x 90mm Bolt (16)

M10 x 198mm Bolt (59)

M8 x 115mm Bolt (64)

Image 25

Weider WESY17011 user manual

Contents

Model No. WESY17011 Serial No QUESTIONS?Customer HOT Line Table of Contents Important Precautions Before YOU Begin Dimensions Make Assembly Easier for Yourself Assembly Each Carriage Bolt. Do not tighten the Nylon Locknuts yet Frame Assembly Tighten the Nylon Locknuts used in steps ARM Assembly Cable Assembly Cable Trap is positioned to hold the Cable in place Bolt and the Nylon Locknut are tight Nylon Locknuts yet Parts are oriented as shown. Do not tightenUpright 42. See the inset drawing. Be sure Inset shows view Inset shows view Tighten the Nylon Locknut the Leg Lever Must pivot freely Seat AssemblyPage Page Adding Weights to the Weight Carriage AdjustmentAttaching and Removing the Seat Attaching the Curl PAD to the Seat Frame Attaching the LEG Lever to the LOW Pulley StationAttaching the LAT BAR to the LEG Lever Weight on Press ARM Butterfly ARM LOW Pulley High Pulley Weight Resistance ChartLbs LEG Lever Tightening the Cables TROUBLE-SHOOTING and Maintenance Long Cable Cable DiagramTOP View Long U-Bracket Short CablePage Qty Description Part LIST-Model No. WESY17011 R0802B Part Identification CHART-WESY17011 Page 19mm Round Inner Cap 25mm Retainer Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT