37.Identify the Resistance Cable (27). Thread the 1/2” Plain Nut (101) onto the bolt at the end of the Resistance Cable (27). Thread the Resistance Cable part way into the lower end of the Weight Tube (63). Tighten the Plane Nut against the Weight Tube.
38.Wrap the Resistance Cable (27) around a 3 1/2” Pulley (15). Attach the Pulley inside of the indicat- ed bracket on the Base (4) with a 3/8” x 2” Bolt (12) and a 3/8” Nylon Locknut (21).
39.Wrap the Resistance Cable (27) up around a 3 1/2” Pulley (15). Attach the Pulley and a Cable Trap (66) to the 3/8” x 3 1/2” Bolt (16) in the Base (4) with a 3/8” Nylon Locknut (21).
40.Wrap the Resistance Cable (27) around a 3 1/2” Pulley (15). Attach the Pulley and another 3 1/2” Pulley (15) inside of the wide bracket on the Base
(4) with a 3/8” x 3” Grade 5 Bolt (98) as shown.
Do not attach a Nylon Jamnut (not shown) yet.
37 |
| |
63 |
| |
101 |
| |
27 |
| |
38 |
| |
21 | 4 | |
15 | ||
| ||
| 12 | |
27 |
| |
39 |
| |
21 | 27 | |
| ||
15 |
| |
| 16 | |
66 |
| |
| 4 | |
40 |
| |
| 15 | |
27 | 98 | |
| ||
15 |
| |
| 4 |
16
