Weider WESY37530 user manual Remove the M10 Nylon Locknut 75 used Step

53. Wrap the Low Cable (63) over a 90mm Pulley	53
(38). Attach the Pulley and a Cable Trap (37) to
the Leg Press Arm (12) with an M10 x 120mm	63
Bolt (76), an M10 Washer (74), and an M10	76
Nylon Locknut (75). Make sure that the Cable				75
Trap is turned to hold the Cable in place. Do	37
not tighten the Locknut yet.	38	74
		12
54. Wrap the Low Cable (63) around a 90mm Pulley	54
(38). Attach the Pulley to the Right Upright (5)
with an M10 x 45mm Bolt (78) and an M10 Nylon			78
Locknut (75).
	63
				5
			38	75
55. Remove the M10 Nylon Locknut (75) used in	55
step 53.
Wrap the Low Cable (63) under a 90mm Pulley			63
(38). Attach the Pulley and a Cable Trap (37) to
the Leg Press Arm (12) with the M10 x 120mm	76
Bolt (76) used in step 53, an M10 Washer (74),	12	74		75
and the M10 Nylon Locknut (75). Make sure that			38
the Cable Trap is turned to hold the Cable in
			37
place.
56. Remove the M10 Nylon Locknut (75) used in	56
step 52.
Wrap the Low Cable (63) over a 90mm Pulley		63	38
			37
(38). Attach the Pulley and a Cable Trap (37) to
the Right Seat Frame (3) with the M10 x 120mm	76
Bolt (76) used in step 52 and the M10 Nylon
			75
Locknut (75). Make sure that the Cable Trap is	3
turned to hold the Cable in place.
57. Remove the M10 Nylon Locknut (75) used in	57
step 51.
Wrap the Low Cable (63) over a 90mm Pulley
(38). Attach the Pulley and a Cable Trap (37) to
the Press Frame (14) with the M10 x 120mm Bolt		76
(76) used in step 51, and the M10 Nylon Locknut				63
(75). Make sure that the Cable Trap is turned	14
to hold the Cable in place.				75
			38	37

20