Weider WESY37530 user manual Frame Assembly, Tighten the Locknuts yet

Frame Assembly	1
1.
Before beginning assembly, make sure you
understand the information in the box on
page 5.	1
Locate and open the parts bag labeled
“FRAME ASSEMBLY.”		83
Press a 40mm x 60mm Inner Cap (42) into the
Right Base (1).				1
Insert four M10 x 53mm Carriage Bolts (83) up		42
through the Right Base (1). Note: It may be
helpful to place tape over the heads of the
Carriage Bolts to hold them in place.
				83
2. Press three 40mm x 60mm Inner Caps (42) into	2
the Left Base (2).
Insert four M10 x 53mm Carriage Bolts (83) up
through the Left Base (2). Note: It may be help-	42
ful to place tape over the heads of the
Carriage Bolts to hold them in place.
				2
		83
	2	42
	83
	42
3. Attach the Right Base (1) to the Left Base (2) with	3
four M10 x 78mm Bolts (86), four M10 Washers
(74), and four M10 Nylon Locknuts (75). Do not	74	86
tighten the Locknuts yet.
	75	74	74	86
				74
	1	75
				2

6