Weider WESY37530 user manual

39. Wrap the Low Cable (63) around a “V”-pulley (40).	39
Attach the “V”-pulley and a Large Cable Trap (39)
to the Left Fly Pivot (21) with an M10 x 91mm Bolt	91	39
(91), an M10 Washer (74), and an M10 Nylon
Locknut (75). Make sure that the Cable Trap is	63	40
turned to hold the Cable in the groove of the
“V”-pulley.
		21
		74
		75
40. Wrap the Low Cable (63) around a “V”-pulley (40).	40
Attach the “V”-pulley and a Large Cable Trap (39)
		75
to the center bracket on the Left Upright (6) with
	39
an M10 x 60mm Bolt (82) and an M10 Nylon		40
Locknut (75). Make sure that the Cable Trap is
	63
turned to hold the Cable in the groove of the
“V”-pulley.	82
		6
41. Wrap the Low Cable (63) around a “V”-pulley (40).	41
Attach the “V”-pulley and a Large Cable Trap (39)
	91
to the Right Fly Pivot (22) with an M10 x 91mm		39
Bolt (91), an M10 Washer (74), and an M10 Nylon
		40
Locknut (75). Make sure that the Cable Trap is
		63
turned to hold the Cable in the groove of the
“V”-pulley.
	74
			22
	75
42. Note: The “V”-pulley (40) attached in step 41	42
is not shown in this step for clarity.
Wrap the Low Cable (63) over a “V”-pulley (40).
Attach the “V”-pulley and a Large Cable Trap (39)
to the bracket on the Left Upright (6) with an M10
x 60mm Bolt (82) and an M10 Nylon Locknut (75).	40
Make sure that the Cable Trap is turned to hold
the Cable in the groove of the “V”-pulley.	82
	39		6
	63

17