41.Press a 1 1/2” Square Inner Cap (32) into the Leg Lever (29).
Lubricate the 5/16” x 2 1/4” Bolt (33). Attach the Leg Lever (29) to the Front Seat Frame (36) with the Bolt and a 5/16” Nylon Locknut (3).
Insert the 3/8” x 2” Eyebolt (35) into the Leg Lever (29) from the direction shown. Tighten a 3/8” Washer (9) and a 3/8” Nylon Locknut (21) onto the Eyebolt.
42.Rest the Front Seat Frame (36) on the indicated pin in the Front Upright (42). Attach the Front Seat Frame to the Front Upright with a 5/16” x 2 3/4” Carriage Bolt (14), 5/16” Washer (8), and the Seat Knob (40).
43.Press two 3/4” Round Inner Caps (34) into each Pad Tube (28).
Insert a Pad Tube (28) into the Front Seat Frame (36). Slide a Foam Pad (30) onto each end of the Pad Tube.
Insert the other Pad Tube (28) into the Leg Lever (29). Slide a Foam Foam Pad (30) onto each end of the Pad Tube.
19
41 |
|
| 36 |
33 | 3 |
| |
| 29 |
35 | 9 |
| |
| 21 |
| 32 |
42 |
|
42 | 40 |
| |
| 8 |
14 |
|
| 36 |
Pin |
|
43 |
|
| 30 |
| 34 |
| 28 |
36 | 34 |
| |
30 |
|
| 29 |
