Weider WESY85310 user manual

22.Locate the Long Cable (72). Attach the Long Cable to the other Small “U”-Bracket (71) with a 1/4” Nylon Locknut (2) and a 1/4” Washer (10).

Do not completely tighten the Nylon Locknut. It should be threaded onto the end of the Cable only a couple of turns, as shown in the inset drawing.

Attach the Small “U”-Bracket (71) to the indicated Weight Tube (63) with a 5/16” x 1 3/4” Bolt (24) and a 5/16” Nylon Locknut (3).

23.Route the Long Cable (72) around the 3 1/2” Pulley (15) on the Top Frame (55). Tighten the 3/8” Nylon Locknut (21) and the 3/8” x 2” Bolt (not shown).

See inset drawing. Wrap the Long Cable (72) around a 3 1/2” Pulley (15). Attach the Pulley and a Cable Trap (66) to the bracket on the Stabilizer

(5) with a 3/8” x 2” Bolt (12) and a 3/8” Nylon Locknut (21). Be sure that the Cable Trap is turned to hold the Cable in place.

22
3		72
		71
		24
63
		10
		2
58
71
2
23
55
15
21
		72
	72	12
		66
		15
		5
		21
		5

13