Lighting instructions, End-of-season shutdown

CGa,CGi,CGs,EG,EGH,LGB,PEG,PFGBoilers

❏End-of-season shutdown . . . . . . . .

Follow boiler shutdown procedure

1.Follow “TO TURN OFF GAS TO APPLIANCE” on the Lighting/Operating instructions on the inside of the jacket panel. You will also find these instructions on pages 13 through 22 of this manual.

Use the Lighting/Operating instruction for the gas valve model installed on the boiler.

2.Do not drain system unless exposure to freezing temperatures will occur.

3.Do not drain the system if it is filled with an antifreeze solution.

4.Do not shut down boilers used for domestic water heating. They must operate year-round.

Propane gas odorant

Propane boilers only — Your propane supplier mixes an odorant with the propane to make its presence detect- able. In some instances, the odorant can fade and the gas may no longer have an odor.

•Propane gas can accumulate at floor level. Smell near the floor for the gas odorant or any unusual odor. If you suspect a leak, do not attempt to light the pilot.

•Use caution when attempting to light the propane pilot. This should be done by a qualified service techni- cian, particularly if pilot outages are common.

•Periodically check the odorant level of your gas.

•Inspect boiler and system at least yearly to make sure all gas piping is leak-tight.

•Consult your propane supplier regarding installation of a gas leak detector. There are some products on the market intended for this purpose. Your supplier may be able to suggest an appropriate device.

Table 2

Lighting / Operating instruction guide

Lighting instructions

Use Table 2 below to locate the correct Lighting/Operating instruction for the gas valve model installed on your boiler.

Standing pilot	Models	Page	Spark-ignited pilot	Models	Page
				CGa-25 – CGa-8
				EG-30 – EG-75	16
			Honeywell VR8204/VR8304	PEG-30 – PEG-55	16
	CGa-25 – CGa-8		Honeywell VR8204/VR8304	PEG-30 – PEG-55
Honeywell VR8200/VR8300	CGa-25 – CGa-8	13		PFG-5
	EG-30 – EG-65
	EG-30 – EG-65			CGi, CGs	21
	PEG-30 – PEG-55			CGi, CGs	21
				CGa-25 – CGa-6	17
				EG-30 – EG-50	17
			White-Rodgers 36E	PEG-30 – PEG-50
Robertshaw 7200	CGa-25 – CGa-6	14	White-Rodgers 36E	CGi	21
	CGa-25 – CGa-6
	EG-30 – EG-50
	EG-30 – EG-50			CGs
	PEG-30 – PEG-50			CGs
	PEG-30 – PEG-50
				CGa-7, CGa-8	18
			White-Rodgers 36C	EG-55 – EG-75	18
			White-Rodgers 36C	PEG-55, PFG-5
				PEG-55, PFG-5

	EG-75			CGi, CGs	21
Robertshaw 7000ERHC	EG-75	15		CGa-25 – CGa-6
	EGH-85, EGH-95		Robertshaw 7200	CGa-25 – CGa-6	19
	EGH-85, EGH-95			EG-30 – EG-50
	PFG-6, PFG-7			EG-30 – EG-50
	PFG-6, PFG-7			PEG-30 – PEG-50
				PEG-30 – PEG-50
			Robertshaw 7000 DERHC	EGH-85 – EGH-125	20
			Robertshaw 7000 DERHC	PFG-6 – PFG-8	20
				PFG-6 – PFG-8
			--	LGB	22

12	Part Number 550-110-592/1000

CGi, PFG, PEG, LGB, CGs specifications

Weil-McLain is a highly regarded manufacturer of boilers and hydronic heating systems, well-known for its innovative approach and commitment to quality. Among its extensive product lineup, the PEG, LGB, CGs, PFG, and CGi series stands out due to their advanced engineering, efficiency, and reliability. Each series caters to varying residential and commercial heating needs, making them versatile options for consumers.

The PEG series is recognized for its impressive efficiency ratings and robust construction. It utilizes a cast iron heat exchanger, which not only enhances heat retention but also ensures longevity. Its low water content and advanced control features allow for quick heating response times, making it ideal for homes requiring reliable heat. The PEG series is available in a range of sizes, ensuring a fit for any application.

The LGB series is tailored for light commercial applications, combining efficiency with remarkable performance. Built with Weil-McLain’s signature high-grade cast iron, the LGB models are designed for durability and ease of maintenance. They offer an impressive thermal efficiency and feature a compact design, making them suitable for installations where space is a concern. Advanced options such as multiple venting configurations contribute to their versatility, adapting to various building designs.

The CGs series is specifically designed for commercial applications and emphasizes efficiency through advanced technology, including an intelligent control system that optimizes operation based on demand. Its low NOx design helps meet stringent environmental standards, while its robust build ensures high performance under heavy load conditions. The CGs is often sought after for larger facilities requiring consistent and efficient heating.

Weil-McLain’s PFG series takes efficiency to the next level with its highly efficient gas-fired design. It features a light-weight configuration and quick-connect venting options, which simplify installation. This series is known for its low emissions and high energy efficiency, making it an eco-friendly choice for today’s environmentally conscious consumers.

Lastly, the CGi series is a standout for residential applications, offering flexibility and ease of use. The series features a cast iron heat exchanger and is compatible with various control systems, providing an adaptable and efficient solution for home heating.

Overall, Weil-McLain’s PEG, LGB, CGs, PFG, and CGi series exemplify the company’s dedication to quality, energy efficiency, and customer satisfaction, providing reliable heating solutions for diverse applications.

Weil-McLain PFG Lighting instructions, End-of-season shutdown, Follow boiler shutdown procedure

Models: CGi PFG PEG LGB CGs EGH