GRIDDLE CLEANING INSTRUCTIONS

CAUTION:

BURN HAZARD

Use due caution when cleaning the hot griddle surface.

Hand protection is required.

IMPORTANT: NEVER USE STEEL WOOL TO CLEAN THE GRIDDLE SURFACE!

IMPORTANT: DO NOT spill or pour water into controls, control panel or wiring.

Damage to internal components from water damage is not covered by warranty.

PREPARATION Allow griddle to cool to 220ºF

FREQUENCY

Daily

TOOLS

Fiber Brush,

 

Mild Detergent, Pumice Stone or Griddle Brick

 

Clean Towel

 

 

 

 

DURING USE

To keep the griddle clean and food flavors at their best, scrape the griddle after preparing each order. Scrape excess food into the waste hole in the grease trough (front of the griddle cooking surface). After each 2 - 3 orders, wipe the griddle surface with a light coat of oil.

DAILY CLEANING

1.Clean the griddle surface daily, at a minimum:

a.Set temperature control to 220ºF. Allow the griddle temperature to drop to 220ºF before proceeding.

b.Pour a small amount of water on the griddle surface and let it "sizzle".

c.Use a pumice stone or griddle brick to remove all remaining waste, and to clean the griddle surface down to bright metal. Wipe off any remaining powder residue.

d.Use a soft-bristled fiber brush in a circular motion to remove any remaining food particles.

e.Turn temperature control to OFF. Allow the griddle surface to cool, then wipe the surface with a clean cloth.

f.Dry the griddle surface thoroughly.

g.Season the cooking surface after each cleaning using the instructions on page 11.

2.At least once each day, the GREASE TROUGH must be thoroughly cleaned. Using a scraper, remove all grease and food waste from the grease trough and into the grease drawer.

3.After scraping all cooking waste from grease trough into GREASE DRAWER, take the grease drawer to kitchen cleaning area and properly dispose of all waste.

a.Clean drawer with hot water and a mild detergent.

b.Dry drawer thoroughly and reinstall in griddle.

4.GRIDDLE EXTERIOR:

a.Wipe down splash guards, griddle body and the grease trough with a cloth dampened with warm water and a mild detergent.

b.A plastic scouring pad and a non-abrasive cleanser may be used for hard-to-remove food particles.

c.Rinse thoroughly with clean water. DO NOT splash or pour water onto control panel or wiring.

d.Dry griddle with a soft, clean cloth.

PROCEDURE IS COMPLETE

272 304621 Operation Manual for OC-2HG Convection Oven/Combo Cook Center

14

Page 16
Image 16
Wells OC-2HG Griddle Cleaning Instructions, During USE, Important Never USE Steel Wool to Clean the Griddle Surface

OC-2HG specifications

The Wells OC-2HG is a sophisticated piece of equipment designed to meet the demands of modern commercial and industrial applications. This innovative unit integrates advanced technologies to enhance efficiency, productivity, and sustainability. One of the standout features of the OC-2HG is its compact design, which allows for easy installation in various settings without requiring extensive modifications to existing infrastructure.

At the core of the OC-2HG is a high-performance engine that boasts low emissions and reduced noise levels, making it suitable for use in urban environments. This is complemented by an intelligent power management system that optimizes fuel consumption and ensures that the device operates at peak efficiency, ultimately lowering operational costs. Additionally, the unit is equipped with a cutting-edge digital control panel that provides real-time monitoring and diagnostics, allowing operators to track performance metrics and quickly address any potential issues.

The OC-2HG also features an advanced cooling system that enhances reliability and extends the lifespan of critical components. This technology allows the unit to operate effectively in a variety of temperature conditions, ensuring consistent performance regardless of environmental factors. Furthermore, the equipment is built with durable materials that withstand the rigors of daily use while minimizing maintenance needs.

Safety is a top priority in the design of the Wells OC-2HG. The unit is equipped with multiple safety features, including automated shut-off mechanisms and emergency stop functions, which help protect both operators and surrounding personnel.

Another notable characteristic of the OC-2HG is its versatility. It can be adapted for a wide range of applications, from construction sites to energy production facilities. This adaptability is supported by a selection of interchangeable accessories and configurations, allowing users to configure the equipment to suit their specific needs.

In conclusion, the Wells OC-2HG combines cutting-edge technology with an emphasis on safety and efficiency. With its compact design, advanced engine, intelligent monitoring systems, and versatility, it stands out as a premier choice in the market for those looking to enhance their operational capabilities while reducing their environmental impact. Whether for industrial or commercial use, the OC-2HG is undeniably equipped to deliver superior performance and reliability.