Wells OC-2HG TABLE OF CONTENTS , SPECIFICATIONS , INTRODUCTION

WARRANTY xi

SPECIFICATIONS 1

FEATURES & OPERATING CONTROLS 2

PRECAUTIONS & GENERAL INFORMATION 4

AGENCY LISTING INFORMATION 4

INSTALLATION 5

OPERATION 8

CLEANING INSTRUCTIONS 12

PREVENTATIVE MAINTENANCE

Hinge Adjustment 16

TROUBLESHOOTING SUGGESTIONS 17

EXPLODED VIEW and PARTS LIST 18

WIRING DIAGRAM 24

PARTS & SERVICE 25

CUSTOMER SERVICE DATA 25

Thank You for purchasing this Wells Manufacturing Co. appliance.

Proper installation, professional operation and consistent maintenance of this appliance will ensure that it

gives you the very best performance and a long, economical service life.

This manual contains the information needed to properly install this appliance, and to use and care for the

appliance in a manner which will ensure its optimum performance.

DIMENSIONS APPLIANCE OVEN CAVITY

Wide 30-1/8” (765mm) 14-3/8” (365mm)

36-1/8" (918mm) incl. 3" side spacers

(req'd. to maintain clearance to combustible walls)

Deep 25-1/4” (641mm ) oven only 21” (533mm)

27-7/8” (682mm) incl. handle

High 25-1/8” (638mm) oven only 20” (508mm)

35-1/2" (895mm) incl. cook-top (no legs)

41-1/4” (1048mm) incl. cook-top and legs

Door Swing 20" (508mm )radius

ELECTRICAL VOLTS kW AMPS

L1 L2 L3

208 VAC 3ø 60Hz 15.2 45.9 39.4 41.4

240 VAC 3ø 60Hz 15.6 41.4 35.3 35.8

Note: Shipped from the factory 3 phase.

Unit is NOT approved for conversion to single phase

1

272 304621 Operation Manual for OC-2HG Convection Oven/Combo Cook Center