PRECAUTIONS AND GENERAL INFORMATION

DANGER

ELECTRIC SHOCK HAZARD

DO NOT SPRAY WATER ON OR AROUND

ELECTRICAL EQUIPMENT

DO NOT WASH FLOOR NEAR ELECTRICAL

EQUIPMENT WITH WATER SPRAY

WARNING:

ELECTRIC SHOCK HAZARD

All servicing requiring access to non-insulated electrical components must be performed by a factory authorized technician.

DO NOT open any access panel which requires the use of tools. Failure to follow this warning can result in severe electrical shock.

CAUTION:

HOT SURFACE

Exposed surfaces can be hot to the touch and may cause burns. Cooking surfaces are very hot during operation and will cause severe burns on contact with unprotected skin.

This appliance is intended for use in commercial establishments only.

DO NOT connect or energize this appliance until all installation instructions are read and followed. Damage to the appliance will result if these instructions are not followed.

This appliance is intended to prepare food for human consumption. No other use is recommended or authorized by the manufacturer or its agents.

Operators of this appliance must be familiar with the appliance use, limitations and associated restrictions. Operating instructions must be read and understood by all persons using or installing this appliance.

Cleanliness of this appliance is essential to good sanitation. Read and follow all included cleaning instructions and schedules to ensure the safety of the food product.

Disconnect this appliance from electrical power before performing any maintenance or servicing.

DO NOT submerge this appliance in water. This appliance is not jet stream approved. Do not direct water jet or steam jet at this appliance, or at any control panel or wiring. Do not splash or pour water on, in or over any controls, control panel or wiring. Do not wash floor around this appliance with water or steam jet.

Exposed surfaces of this appliance can be hot to the touch and may cause burns.

Do not operate this appliance if the control panel is damaged. Do not operate this appliance if the keypad section of the control panel is torn or broken. Call your Authorized Wells Service Agent for service.

The technical content of this manual, including any wiring diagrams, schematics, parts breakdown illustrations and/or adjustment procedures, is intended for use by qualified technical personnel.

Any procedure which requires the use of tools must be performed by a qualified technician.

This manual is considered to be a permanent part of the appliance. This manual and all supplied instructions, diagrams, schematics, parts breakdown illustrations, notices and labels must remain with the appliance if it is sold or moved to another location.

This appliance is made in the USA. Unless otherwise noted, this appliance has American sizes on all hardware.

272 304621 Operation Manual for OC-2HG Convection Oven/Combo

AGENCY LISTING INFORMATION

This appliance conforms to NSF Standard 4 for sanitation only if

STD 4installed in accordance with the supplied Installation Instructions and maintained according to the instructions in this manual.

E6070

This appliance is

Listed under UL File E6070 for 208V and 240V.

 

 

4

Cook Center

Page 6
Image 6
Wells OC-2HG Precautions and General Information, Agency Listing Information, Electric Shock Hazard, HOT Surface

OC-2HG specifications

The Wells OC-2HG is a sophisticated piece of equipment designed to meet the demands of modern commercial and industrial applications. This innovative unit integrates advanced technologies to enhance efficiency, productivity, and sustainability. One of the standout features of the OC-2HG is its compact design, which allows for easy installation in various settings without requiring extensive modifications to existing infrastructure.

At the core of the OC-2HG is a high-performance engine that boasts low emissions and reduced noise levels, making it suitable for use in urban environments. This is complemented by an intelligent power management system that optimizes fuel consumption and ensures that the device operates at peak efficiency, ultimately lowering operational costs. Additionally, the unit is equipped with a cutting-edge digital control panel that provides real-time monitoring and diagnostics, allowing operators to track performance metrics and quickly address any potential issues.

The OC-2HG also features an advanced cooling system that enhances reliability and extends the lifespan of critical components. This technology allows the unit to operate effectively in a variety of temperature conditions, ensuring consistent performance regardless of environmental factors. Furthermore, the equipment is built with durable materials that withstand the rigors of daily use while minimizing maintenance needs.

Safety is a top priority in the design of the Wells OC-2HG. The unit is equipped with multiple safety features, including automated shut-off mechanisms and emergency stop functions, which help protect both operators and surrounding personnel.

Another notable characteristic of the OC-2HG is its versatility. It can be adapted for a wide range of applications, from construction sites to energy production facilities. This adaptability is supported by a selection of interchangeable accessories and configurations, allowing users to configure the equipment to suit their specific needs.

In conclusion, the Wells OC-2HG combines cutting-edge technology with an emphasis on safety and efficiency. With its compact design, advanced engine, intelligent monitoring systems, and versatility, it stands out as a premier choice in the market for those looking to enhance their operational capabilities while reducing their environmental impact. Whether for industrial or commercial use, the OC-2HG is undeniably equipped to deliver superior performance and reliability.