Wells WM-TR operation manual Cleaning Instructions, Daily Cleaning, Burn Hazard, Equipment Damage

CLEANING INSTRUCTIONS

CAUTION:

BURN HAZARD

Water in tank is extremely hot. Use care when draining tank.

CAUTION:

HOT SURFACES Exposed surfaces can be hot to the touch and may cause burns.

CAUTION:

EQUIPMENT

DAMAGE

DO NOT SUBMERGE TANK IN WATER!

IMPORTANT:

DO NOT use bleach, abrasive cleansers or cleansers containing chlorides.

DAILY CLEANING

PRECAUTIONS: Press POWER SWITCH to OFF (0). Drain all water from TANK. Remove tank from Water-Max™.

FREQUENCY: Minimum - Daily, or as required

TOOLS: Soft Cloth, Soft Bristle Brush

TANK LID

HANDLE &

BONNET

TANK

FAUCET

FAUCET

BODY

SCREEN

Wipe down the exterior of the Water-Max™ with a soft damp cloth.

Use a soft bristle brush to remove any calcium or lime build-up on the end of the dispensing nozzle. Wipe dispensing nozzle clean with a soft damp cloth.

Remove TANK LID.

Wipe TANK FAUCET, interior and exterior of tank with a soft damp cloth. DO NOT SUBMERGE TANK IN WATER!

Fill tank with cool, clean water. Check operation of faucet. If the faucet leaks:

Drain tank

Disassemble faucet by unscrewing bonnet from faucet body. Clean or repair faucet as necessary.

Reassemble bonnet on faucet body. Reinstall TANK LID.

Drain any remaining water from tank and re-install on Water-Max™. Press POWER SWITCH to ON (I) and test for proper operation.

Procedure is complete.

12