Wells WM-TR operation manual Deliming Instructions, Chemical Burn Hazard

DELIMING INSTRUCTIONS

PRECAUTIONS: Water in tank is EXTREMELY HOT (± 200ºF) Turn Water-Max™ OFF and allow to cool

Tank full of water is HEAVY (64 lbs.) Drain water from tank before moving.

FREQUENCY: Weekly, or as required when Water-Max™ will not maintain water at 197ºF or higher.

TOOLS: Goggles, Chemical Resistant Gloves

LIMESHIELD™ Scale and Food Soil Inhibitor

Solution Bottle

Scrub Pad (Standard Green)

1.Power switch is located on right side of Water-Max™ base. Press POWER SWITCH to OFF.

Drain 1 GALLON of water from TANK.

2.Examine SOLUTION BOTTLE for serviceability. If it is cracked or distorted, replace it with a new bottle.

Pour 2.5 ounces of LIMESHIELD™ into solution bottle. Slowly add 4 ounces of warm tap water.

DISPENSER CAP is attached to the top of Water-Max™ with a chain. Screw quick-disconnect dispenser cap onto solution bottle.

Gently shake solution bottle. Allow solution to completely dissolve.

IMPORTANT: Delime with LIMESHIELD™ Scale and Food Soil Inhibitor ONLY!

3.QUICK-DISCONNECT FITTING is located on the left top of Water- Max™.

Invert solution bottle. Insert bottle quick-disconnect fitting into Water-Max™ quick- disconnect fitting. Press solution bottle down

until fitting “clicks”, locking solution bottle in place.

CAUTION

Burn Hazard

Water in Water-Max™ is

EXTREMELY HOT

CAUTION

Chemical Burn

Hazard

Deliming chemicals are caustic.

Wear protective goggles and gloves during this procedure.

ON

OFF

1

GAL

HOT

INSTALL QUICK-

DISCONNECT

INSERT

BOTTLE

13