Wells WM-TR Set-Up and Usage, Water-Max Operation, To Keep Water in Tank Hot, Burn Hazard

Water-Max™ is used to dispense hot water for food preparation.

Set-Up and Usage

Install the water tank on the Water-Max™ shelf.

Make sure that the tank is properly positioned, that the connector is seated and that the dispensing nozzle lowered into position in the water tank lid.

Press the power switch to ON and allow the water tank to fill with hot water.

Status indicator will glow when the tank is filling. Status indicator will go out when the tank is full.

Place an appropriate container under the faucet. Being careful to not overflow the container, pull the faucet handle to dispense hot water.

Fig. 6 Water-Max™ Operation

To Keep Water in Tank Hot

Leave the power switch ON. Water-Max™ will maintain the preset tank water temperature and will be ready to dispense hot water.

OPERATION

WARNING:

BURN HAZARD

Water-Max™ is designed to operate with a matching 5 gal. water tank only.

Do not hold anything other than the matching water tank under the dispensing nozzle. Splashing hot water will cause serious burns.

GENERAL GUIDELINES

NEVER hold or place anything, other than the proper tank, under the dispense nozzle. Draw water only from the hot water faucet of the water tank.

NEVER attempt to remove or carry a water tank while full of water.

NEVER attempt to operate Water-Max™ without the lid properly installed on the water tank.

CAUTION:

Hot Surface

Exposed surfaces can be hot to the touch and may cause burns.

11