|
| FEATURES & OPERATING CONTROLS (continued) |
|
|
|
ITEM | DESCRIPTION | COMMENT |
VENTILATOR SECTION CONTROLS | ||
V.01 | POWER SWITCH | Energizes blower motor. If, after 10 seconds, proper conditions |
|
| are met, appliance is energized. |
V.02 | POWER ON INDICATOR | GREEN. Glows when POWER switch is ON. |
V.03 | CHECK FILTERS ALARM | AMBER. Glows if one or more filters are out of position. Check |
| INDICATOR | all filters and baffles for proper installation. |
V.04* | REPLACE PREFILTER | AMBER. Glows when PREFILTER is approaching the end of its |
| ALARM INDICATOR | service life and must soon be replaced. |
V.05* | REPLACE FILTER PACK | AMBER. Glows when FILTER PACK is approaching the end of |
| ALARM INDICATOR | its service life and must soon be replaced. |
V.06* | SERVICE REQUIRED | RED. Glows when PREFILTER and/or FILTER PACK has |
| ALARM INDICATOR | reached the end of its service life and is too loaded to allow |
|
| sufficient air flow. Filter MUST be replaced. Appliance is SHUT |
|
| DOWN until expended filters are replaced. |
*See PRECAUTIONS & GENERAL INFORMATION, pages 6 & 7 for special procedures regarding prefilters and filter packs.
GRIDDLE SECTION CONTROLS
G.01 | GRIDDLE TEMPERATURE | Thermostat control of temperature of one griddle half. |
| CONTROL |
|
G.02 | INDICATOR LIGHT | AMBER. Glows when heating element is energized. |
OPTIONAL WARMER SECTION CONTROLS
W.01 | WARMER TEMPERATURE | Infinite switch control of one warmer drawer. |
| CONTROL |
|
W.02 | POWER ON INDICATOR | AMBER. Glows when associated control is turned ON. |
W.03 | THERMOMETER | Shows temperature in warmer drawer. Must be ordered at time |
| (OPTIONAL ) | of initial equipment build. |
W.04 | HUMIDITY CONTROL | Slide control of shutters to control air circulation within the |
|
| warmer drawer. |
5
