Wells WVG-136RW CLEANING INSTRUCTIONS continued, FREQUENCY Weekly, Ventilator Section

CLEANING INSTRUCTIONS (continued)

VENTILATOR WEEKLY CLEANING

ROLL WARMER WEEKLY CLEANING

PREPARATION: Disconnect appliance from electric power Allow to cool before cleaning

FREQUENCY: Weekly

TOOLS: Warm water and a mild detergent Soft clean cloth or sponge Bristle brush

Container for disposal of grease

VENTILATOR SECTION

Remove the grease baffle, pre-filter assembly, grease trough and grease cup. Empty the grease trough and grease cup.

Remove the pre-filter from the filter frame. Wash and rinse the filter frame ONLY.

Wash and rinse the grease baffle, grease trough and grease cup in a sink or dishwasher using mild detergent and warm water. Allow to air dry.

Reinsert the pre-filter into the filter frame. Reinstall the pre-filter, grease baffle, grease trough and grease cup.

ROLL WARMER SECTION

Remove roll warmer drawers, drawer inserts and Humitrol racks.

Brush crumbs from drawer slides and interior of warmer cavity with a bristle brush.

Wash and rinse the drawer inserts and Humitrol racks in a sink or dishwasher using mild detergent and warm water. Allow to air dry.

Reassemble and reinstall warmer drawers.

Procedure is complete

CAUTION:

Electric Shock

Hazard

Disconnect appliance from electric power before cleaning.

CAUTION:

Hot Surface

Exposed surfaces can be hot to the touch

and may cause burns. Allow appliance to cool before cleaning.

IMPORTANT:

Never allow PRE-FILTER or FILTER PACK to get wet. DO NOT wash either of these two filters. Washing these filters will ruin them and cause the appliance to shut-down.

IMPORTANT:

DO NOT spill or pour water into controls, control panel, wiring or coil-type hotplate elements. Damage to internal components will occur. Damage to internal components from water damage is not covered by warranty.

IMPORTANT:

DO NOT use steel wool or metal implements to clean drawers or cabinet surfaces.

17