Weslo 831,21611,0 user manual Assembly

ASSEMBLY

Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.

In addition	to the included tools, assembly requires a Phillips screwdriver _--_,		two adjustable
wrenches	_,	and pliers _.

Use the drawings below to identify the small parts used in assembly. The number in parentheses below

each drawing is the key number of the part, from the PART LIST on page 14. The second number is the quantity needed for assembly. Note: Some small parts may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-assembled.

M4 x 5mm
Self-tapping	M4 x 8mm	M4 Washer	M6 Washer	M8 Split	M8 Washer
Screw (66)-2	Screw (29)-2	(70)-2	(68)-8	Washer (42)-3	(54)-4

M6 Curved	M6 Nylon	M8 Nylon	M10 Nylon
Washer (69)-4	Locknut (63)-4	Locknut (10)-2	Locknut (65)-2

M6 x 30mm Button	M6 x 35mm Button	M6 x 15mm Button	M8 x 20mm Button
Bolt (64)-4	Screw (61)-8	Screw (46)-4	Screw (34)-3

MIO x 75mm Carriage Bolt (30)-2 MIO x 60mm Button Screw (33)-2

M8 x 125mm Bolt (62)-2