NordicTrack NTCCM58020 user manual Assembly

ASSEMBLY

Assembly requires two people. Place all parts of the stepper in a cleared area and remove the packing mate- rials. Do not dispose of the packing materials until assembly is completed. In addition to the included allen

wrenches, assembly requires an adjustable wrench and a rubber mallet .

As you assemble the stepper, use the drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page 18. The second number refers to the quantity used in assembly. Note: Some small parts may have been pre-assem- bled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled.

M8 Nylon	M10 Nylon	M8 Split	M10 Split
Locknut (28)–4	Locknut (27)–4	Washer (54)–4	Washer (30)–6
Console		M10 x 75mm Button
Screw (57)–4		Screw (92)–2
M10 x 25mm Button		M10 x 82mm Button
Screw (29)–4		Bolt (26)–4
M8 x 35mm		M10 x 91mm Button
Button Bolt (24)–4
		Screw (63)–2

1.While another person lifts and holds the indicated end of the Frame (1), attach the Front Stabilizer (95) to the Frame with two M10 x 75mm Button Screws (92).

Make sure that the Front Stabilizer is turned so the Wheels (67) are not touching the floor.

1

67

92

67

95

1

4