1.While another person lifts the front of the Frame (1) slightly, attach a Stabilizer (2) with two M10 x 65mm Carriage Bolts (30) and two M10 Nylon Locknuts (33).
2.Attach a Stabilizer (2) to the Seat Frame (5) with two M10 x 65mm Carriage Bolts (30) and two M10 Nylon Locknuts (33).
3.Insert the end of the Seat Frame (5) into the Frame
(1). Next, firmly press the Seat Frame Bushing (20) into the Frame. Secure the Seat Frame Bushing to the Frame with two M4 x 5mm Screws (65). Tighten the Adjustment Knob (9) into the Frame.
Carefully tip the exercise cycle onto its side. Attach the two Bumpers (66) to the Frame (1) with two M4 x 8mm Screws (64). Then, tip the exercise cycle back onto the Stabilizers (2).
4.Attach the Left and Right Seat Brackets (52, 53) to the Seat Frame (5) with two M8 x 125mm Bolts (57), four M8 Washers (14), and two M8 Nylon Locknuts (10) as shown. Do not tighten the Nylon Locknuts yet.
1 |
| 2 |
| 30 | |
|
| |
|
| 1 |
|
| 33 |
2 |
|
|
|
| 5 |
|
| 33 |
|
| 2 |
| 33 |
|
|
| 30 |
3 |
| 9 |
|
| |
|
| 65 |
1 |
| 20 |
|
| |
65 | 66 |
|
|
| |
| 64 | 5 |
|
| |
|
| 2 |
4 |
| 57 |
|
| 14 |
|
| 5 |
| 14 | 14 |
|
| |
| 10 | 53 |
|
| 14 |
|
| 52 |
5
