Weslo WATL26806.0 user manual Assembly

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex keys		and your own Phillips screwdriver	, rubber
mallet	, adjustable wrench	, and wire cutters	.

For help identifying the assembly hardware, see the drawings below. The number in parentheses below each drawing is the key number of the part, from the PART LIST on page 24. The number following the parentheses is the quantity needed for assembly. Note: If a part is not in the parts bag, check to see if it has been preassem- bled. To avoid damaging plastic parts, do not use power tools for assembly.

Wheel Spacer		Handrail Star	Upright Star
(94)–4	Upright Washer
		Washer (11)–4	Washer (6)–4
	(7)–2

3/4" Screw (3)–8	Silver Ground Screw	Handrail Bolt
	(10)–2
Nut (12)–4		(9)–4

Wheel Bolt/Upright Bolt (4)–6

Frame Bolt (1)–2

6