West Bend Back to Basics Save These Instructions, Assembling Your Cocoa~Latte, Pour Spout

•To disconnect, turn any control to “OFF,” then remove plug from wall outlet.

•Do not move an appliance containing hot water, tea or other hot liquids.

•Do not place the mixing container on the motor base while the motor is running.

•Do not remove the mixing container from the motor base while the motor is running.

•Do not run the motor while the mixing container is empty.

•After running the motor continuously for one cycle, wait at least five minutes before running another cycle.

•Always operate this appliance with the lid in place.

•Do not attempt to repair this appliance yourself.

•For household use only.

SAVE THESE INSTRUCTIONS

ASSEMBLING YOUR COCOA~LATTE™

Lid
Pour Spout
Mixing Container
Dispensing Valve
Froth/Dispense
Cancel
Motor Base	“ON/OFF” Switch

Before using for the first time: Wash the mixing container, dispensing valve, and

lid with warm, soapy water. Rinse thoroughly and dry. Note: Do not wash any parts in the dishwasher and do not immerse the motor base or the mixing container in water. This may permanently damage the product and void the warranty. Your new Cocoa~Latte™ is designed for years of service and is equipped with a long-life, low- speed motor. This motor requires several uses for initial break-in. You will notice that the motor speed and vortex action increase after the first several uses.

3