Jenn-Air W30400 Oven Light Bulb, Control Panel Area and Display Window, To replace light bulb

Control Panel Area and Display Window

Wipe with soft cloth dampened with soapy water or glass cleaner. Do not spray any cleaning solutions directly onto the display window or use large amounts of soap and water. Do not scrub with S.O.S. pads or abrasive cleaners.

Stainless Steel (select models)

Do not use any cleaning product containing chlorine bleach.

Always wipe with the grain when cleaning.

Daily Cleaning/Light Soil-Wipewith one of the following -soapy water, white vinegar/ water solution, Formula 409 Glass and Surface Cleaner or a similar multi-surface cleaner

-using a sponge or soft cloth. Rinse and dry. To polish and help prevent fingerprints, follow with Stainless Steel Magic Spray (Jenn-Air Model A912, Part No. 20000008).

Moderate/Heavy Soil -Wipe with one of the following - Bon Ami or Soft Scrub - using a damp sponge or soft cloth. Rinse and dry. Stubborn soils may be removed with a damp Scotch-Brite pad; rub evenly with the grain. Rinse and dry. To restore luster and remove streaks, follow with Stainless Steel Magic Spray (Jenn-Air Model A912, Part No. 20000008).

Discoloration - Using a damp sponge or soft cloth, wipe with Cameo Stainless Steel Cleaner. Rinse immediately and dry. To remove streaks and restore luster, follow with Stainless Steel Magic Spray (Jenn-Air Model A912, Part No. 20000008).

\

-1

To remove pull forward to the “stop”position; lift up on the front of the rack and pull out.

Oven Light Bulb

Before replacing bulb, disconnectpower to oven at the main fuse or circuit breakerpanel. Be sure that the entire oven cavity including the light bulb is cool before attempting to remove.

To replace light bulb

1.Carefully unscrew the glass light lens.

2.To obtain firm grasp on the bulb, wear protective rubber gloves. Remove by turning bulb to the left. Do not touch a hot oven light bulb with a damp cloth as bulb will break. Note: If the bulb does break and you wish to remove it, be certain power supply is disconnected and wear protective gloves. You may contact your authorized Jenn-Air Service Contractor for service.

3.Replace bulb with a 40 watt oven-rated appliance bulb. Bulb with brass base is recommended to prevent fusing of bulb into socket.

4.Replace bulb cover and reconnect power to oven. Reset clock.

33