Jenn-Air W30400 manual To set oven to start cleaning at a later time

Models: W30400

1 36
Download 36 pages 38.37 Kb
Page 30
Image 30
To set oven to start cleaning at a later time

To set oven to start cleaning at a later time

1-3. Follow Steps 1-3 in previous section on page 29.

4.Touch Stop Time Pad.

Indicator Words STOP TIME will flash in the Display. The Indicator Word CLEAN and the calculated stop time will also appear in Display.

Note WW30430 Owners: The appropriate letter (U-upper oven; L-lower oven) and OVEN will also flash.

5.Touch the appropriate number pads to enter stop time.

A stop time can only be accepted for later in the day. If an unacceptable stop time is entered, “Err”will flash briefly in the Display and then Display will return to previous acceptable Stop Time.

Example: If at 9 o’clock you set the oven to clean for three hours, the calculated stop time would be “12:OO”.The Display would show:

If you want the stop time to be 1 o’clock, touch the number pads “1,O,O”. Five seconds later, the Display would show Start Time:

After five seconds, the Display will return to current time of day, thus showing:

The LOCK Indicator Word will come on and the cooling fan will go off as soon as the oven door has latched.

When the oven begins to clean, the Indicator Word ON and the cooling fan will come on and the Indicator Word DELAY will go off.

When the clean time has been completed, the Indicator Words CLEAN and ON will go off. The Indicator Word LOCK and the cooling fan will remain on until the oven has cooled down and the door has unlocked.

30

Page 30
Image 30
Jenn-Air W30400 manual To set oven to start cleaning at a later time