Jenn-Air W30400 manual l-4.Follow preceding Steps l-4, on page

Models: W30400

1 36
Download 36 pages 38.37 Kb
Page 13
Image 13
l-4. Follow preceding Steps l-4,on page 12.

.

To set oven to start at future time and shut off automatically

l-4. Follow preceding Steps l-4,on page 12.

5.Touch Stop Time Pad.

Indicator Words STOP and TIME will flash. Display will show the calculated stop time based on current time of day and cook time. Note WW30430 Owners: The appropriate letter (U - upper oven; L - lower oven) and OVEN will also flash.

6.Touch the appropriate number pads to enter desired stop time.

A stop time can only be accepted for later in the day. Note: Since food continues to cook if left in the oven, it is suggested that the clock controls be used primarily to start the oven when no one is in the kitchen. Provisions should be made to have the food removed as soon as the chime has sounded.

Example: If at 10 o’clock you set the oven for 350” convection baking and 2 hours and 30 minutes cooking time, the calculated stop time would be “12:30”. The Display would show:

If you want the stop time to be 1 o’clock, touch the number pads “1,O,O”.Five seconds later, the Display will briefly show the start time:

After five seconds, the display will return to current time of day, thus showing:

At the end of the delayed period, the DELAY Indicator Word will go off and the oven will begin to heat. 100” will be shown. As the oven heats, the Display will show a rise in increments of 5” until programmed temperature is reached.

At the end of programmed Cook Time, the oven will shut off automatically and a “chime”will be heard four times and “End”will appear in the Display. If oven is not cancelled, “End”will remain in the Display and there will be one chime every minute for ten minutes.

IMPORTANT

0 Note WW30430 Owners: Clock controlled baking can be used with only one oven at a time. To program, first set the bake or convect bake or convect roast function for the desired oven, then set the cook time. If one oven is set for clock controlled baking, the other oven cannot be set to self-clean.

0 To recall time function programmed: Touch the appropriate time pad.

0To cancel timed function only: Hold Cook Time Pad for four seconds. This will only cancel cook time and stop time, not programmed bake mode.

0If more than five seconds elapse between touching a function pad and touching appropriate number pads, the oven is not set and Display will return to previous Display.

13

Page 13
Image 13
Jenn-Air W30400 manual l-4.Follow preceding Steps l-4, on page