Specifications | WD Enterprise WDE2170/WDE4360 |
2.5.Environmental Specifications
2.5.1. Shock and Vibration
All shock and vibration specifications apply to the mounting and orientation conditions described in section 2.3. Orientation axes are defined in Figure
Table
Shock
Operating | 10G (2 per second maximum) |
70G (3 drops per axis maximum) | |
10,000 rad/s2 | |
Note: |
Vibration
Operating | ||
| Hz, 0.75G (0 to peak) | |
| Hz, 2.0G (0 to peak) | |
Sweep Rate | One octave per minute (minimum) |
Operating Shock
WD Enterprise drives are tested by applying a linear shock in each axis, one axis at a time, at a rate not exceeding two shocks per second.
The drive incurs no physical damage and no hard errors while subjected to intermittent shock not exceeding the level listed in Table
Non-operating Shock
WD Enterprise drives are tested by applying a linear shock in each axis, one axis at a time. A maximum of three shocks per axis is applied.
The drive incurs no physical damage when subjected to
Non-operating Rotational Shock
WD Enterprise drives are tested by applying a rotational shock in each direction, about each axis, one axis at a time.
The drive incurs no physical damage when subjected to rotational shocks not exceeding the level listed in Table
14 | RELEASED |