RPC-4840NRemotePowerController;User'sGuide
Figure2.2:BackPanel
Options Switch: Four DIP Switches which set the default baud rate, boot delay, echo mode, and timeout.
Default Button: Used in conjunction with the Reset Button to reset the unit to defaults (see Section 4.3.)
Console Port: A Male
Modem Port: A Male
Reset Button: Used in conjunction with the Default Button to reset the unit to defaults (see Section 4.3.)
Circuit Module 1: For connection to your DC power supply and DC powered device. Each circuit is capable of switching up to 40 Amps. Note that power for control functions is also derived from the Circuit 1 input terminal.
A.ON Indicator: Lights when the corresponding Circuit Module is switched On (switch closed).
B.Emergency Override Breaker: If the circuit is overloaded, the breaker pops out and opens the circuit. If necessary the Override Breaker can also be manually pulled out to open the circuit. To reset the circuit, press the Override Breaker in.
Circuit Module 2 (Optional): For connection to a second DC power supply and DC powered device. Same as Circuit Module 1.
