RPC-4840NRemotePowerController;User'sGuide
6.7. Operating Tips
When connecting to the RPC via network, modem or console port, the following factors should be kept in mind:
1.One Connection at a Time: Only one port can access the command mode at a time. Therefore, it is recommended that users should always disconnect using the /X command when finished communicating with the unit. When a command port is busy, the RPC will react as follows:
a)Network Port Busy: If a second user attempts to connect via the Modem Port, the RPC will send a busy message. If a second user attempts to connect via the Console Port, the port will not wake.
b)Modem Port Busy: If a second user attempts to connect via the Network Port, the connection will be refused. If a second user attempts to connect via the Console Port, the port will not wake.
c)Console Port Busy: If a second user attempts to connect via the Network Port, the connection will be refused. If a second user attempts to connect via the Modem Port, the Console Port will disconnect and the Modem Port will be granted access; the Modem Port has priority over the Console Port.
2.Ping Packet Size: The RPC will not accept Ping Packets larger than approximately 1000 bytes.
If you have any questions regarding configuration or operation of the
