INSTALLATION
INSTALLATION INSTRUCTIONS
This appliance must be installed by an authorised person and in compliance with :
1.AS 5601 ‘Gas Installations’ (Australia) or NZS 5261 ‘Installation of Gas Burning Appliances and Equipment’ (New Zealand) or the relevant installation code for gas appliances of your country.
2.The local gas fitting regulations, municipal building codes, electrical wiring regulations and any other relevant statutory regulations.
3.The particular instructions as given below.
Figure 4–60cm and 75cm models cut-out
CAUTION
Cooktops are supplied for use with natural gas (NG).
To use on LPG the injectors MUST be changed using
the conversion kit supplied. Refer LP Conversion on
page 12.
4.A certificate of compliance MUST be given to the customer after the appliance is successfully installed.
5.This appliance must be earthed.
Gas supply connection location
560mm
Figure 4–90cm models cut-out
*
480mm
Gas supply connection location
*
830mm
480mm
7
