Westinghouse W31501 manual Built-in Speakers, Connecting the AC Power Adapter

nextgen-nt1503.book Page 10 Thursday, December 25, 2003 4:42 PM

Getting to Know Your LCD Display

2.8 Built-in Speakers

The LCD display comes with a pair of built-in stereo speakers located at the front of the unit.

2.9 Connecting the AC Power Adapter

You must use the 100-240 VAC/60W power adapter that is included with the LCD display.

Caution:

•Make sure you have read and understood the safety notes before connecting the LCD display to the power adapter and electrical outlet.

•Do not use any other AC power adapter except the adapter that was included with your LCD display.

•Contact your dealer if you need a replacement adapter.

1Connect the power cord to the AC adapter.

2Plug the power cord into an electrical outlet. Contact your dealer or a qualified service technician if the plug does not fit into the outlet.

3Insert the small end of the adapter cord into the DC-in connector at the back of the LCD display. The power LED on the front panel glows orange.

AC 100~240V

Power

10