Whirlpool 1188177 AIR Conditioner Care, ChangingAirDirection, NormalSounds, CleaningtheAirFilter

To set Timer for a 0.5- to 24-hour delay before air conditioner turns Off (air conditioner must be ON):

1.Press TIMER. Timer indicator light on air conditioner will flash. Display on air conditioner will show remaining hours before air conditioner will turn off.

2.Press the plus or minus pad to change the delay time (0.5 to 24 hours).

3.Press TIMER again or wait 10 seconds. Timer indicator light on air conditioner will remain on.

To set Timer to turn on air conditioner, keeping previous settings:

1.Turn off air conditioner.

2.Press TIMER. Timer indicator light on air conditioner will flash. Display on air conditioner will show remaining hours before air conditioner will turn off.

3.Press the plus or minus button to change delay time (0.5 to 24 hours).

4.Press TIMER again or wait 10 seconds. Timer indicator light on air conditioner will remain on.

To set Timer to turn on air conditioner, changing the previous settings:

1.Turn on air conditioner.

2.Adjust Mode to Cool, Heat (on some models), Fan Only, or press POWER SAVER.

3.Adjust Fan Speed to Auto, Turbo, High or Low.

4.Adjust temperature between 66°F (19ºC) and 88°F (31ºC).

5.Wait 3 seconds before turning off air conditioner.

6.Press TIMER. Timer indicator light on air conditioner will flash. Display on air conditioner will show remaining hours before air conditioner will turn on.

7.Press the plus or minus button to change delay time (0.5 to 24 hours).

8.Press TIMER again or wait 10 seconds. Timer indicator light on air conditioner will remain on.

ChangingAirDirection

Use the tabs to direct the air up, down, right, left or straight ahead.

NormalSounds

When your air conditioner is operating normally, you may hear sounds such as:

■Droplets of water hitting the condenser, causing a pinging or clicking sound. The water droplets help cool the condenser.

■Air movement from the fan.

■Clicks from the thermostat cycle.

■Vibrations or noise due to poor wall or window construction.

■A high-pitched hum or pulsating noise caused by the modern high-efficiency compressor cycling on and off.

AIR CONDITIONER CARE

Your new air conditioner is designed to give you many years of dependable service. This section tells you how to clean and care for your air conditioner properly. Call your local authorized dealer for an annual checkup. Remember… the cost of this service call is your responsibility.

CleaningtheAirFilter

The air filter is removable for easy cleaning. A clean filter helps remove dust, lint, and other particles from the air and is important for best cooling and operating efficiency. Check the filter every 2 weeks to see whether it needs cleaning.

NOTE: Do not operate the air conditioner without the filter in place.

1.Turn off air conditioner.

2.Grasp air filter at tabs. Slide air filter up and out of filter slot.

3. Use a vacuum cleaner to clean air filter. If air filter is very dirty, wash it in warm water with mild detergent. Do not wash air filter in the dishwasher or use any chemical cleaners.

NOTE: Air dry filter completely before replacing to ensure maximum efficiency.

4. Slide air filter down into filter slot.

12