A
E
B
D
C
A. Width (W) D. Horizontal insulation strip
B. Height (H) E. Vertical insulation strip
C. Depth (D)
Wall sleeve dimensions (W x H x D):
25⁷⁄₈" x 15¹⁷⁄₃₂" x 16²³⁄₃₂" (65.7 cm x 39.5 cm x 42.5 cm)
1.Remove the front and back covers from the new wall sleeve.
NOTE: Save the covers for future use to seal the wall sleeve if the air conditioner is removed.
2.See instructions provided with wall sleeve for complete installation of wall sleeve and grille.
Insert the 4 - #8 - 32 sheet metal screws (provided) through the holes in the grille and into the wall sleeve.
CompleteInstallation
1.Assemble trim frame by laying the 4 frame pieces face down on a flat surface and snapping them securely together.
2.Install the ¹⁄₈" insulating foam around the inside edge of the trim frame. Begin in the bottom left corner and place the insulating foam around the entire inside of trim frame. Check to be sure foam is flush with the bottom edge of the trim frame.
B
A
B
A. Insulating foam seals
B. Trim frame
3.Slide the trim frame onto the air conditioner until the foam makes a seal with the wall sleeve.
A
A. Trim frame against wall sleeve
8
