3.Remove the two hex head screws from the upper access panel. Lift up on the bottom of the access panel to release it from the front of the ice maker. Do not disconnect the wires.
4.With the upper access panel raised, remove the hinge pin from the top hinge.
5.Remove the door from the hinges and screw the top hinge pin back into the top hinge.
6.Replace the upper access panel loosely on the ice maker.
7.Reverse the door endcaps as follows:
■Remove both the screws and endcaps (top and bottom).
■Place the top endcap on the bottom of the opposite side of the door with the long flat side facing the door front.
■Place the bottom endcap on the top of the opposite side of the door with the long flat side facing the door front.
8.Set the door aside.
To reverse the hinges:
1.Unscrew and remove the top hinge. Replace the screws in the empty hinge holes.
2.Remove the screws from the bottom of the opposite side of the ice maker cabinet. Turn the top hinge upside down so that the hinge pin points up. Place the hinge on the bottom opposite side of the ice maker and tighten screws.
3.Remove the plastic hinge pin sleeve from the “old” bottom hinge and replace it on the new bottom hinge pin.
4.Remove the “old” bottom hinge screws and hinge. Replace the screws in the empty hinge holes.
5.Remove the screws from the top of the opposite side of the ice maker cabinet. Turn the hinge upside down so that the hinge pin points down.
6.Raise the upper access panel and place the hinge on the top opposite side of the ice maker. Tighten the hinge screws.
7.Remove the top hinge pin.
To replace door on hinges:
1.Place plastic hinge pin sleeve in the top hinge hole on the door. Align the door with the top hinge hole and replace the top hinge pin.
2.Replace the upper access panel and secure it with the hex head screws.
3.Replace the handle and handle screws.
Top Hinge
1.Hinge Pin
2.Hinge Pin Sleeve
3.Hinge
4.Hex Head Hinge Screw
Bottom Hinge
1.Hex Head Hinge Screw
2.Hinge Pin Sleeve
3.Hinge
4.Hinge Pin
To reverse the door catch:
1.Remove the hole plugs from the opposite side of the door and set aside.
2.Remove the screws from the magnetic door catch and replace it on the opposite side of the door.
3.Push the hole plugs into place on the opposite side of the door.
4.Plug in ice maker or reconnect power.
10
