Selecting cycles/temps

Press ON/SELECT until the light glows by the desired cycle. (The ‘preset” selections are: Perm Press-Med, Automatic Reg Dry with Cycle Signal and FINISH GUARD@Options ON.)

YOU SEE

Preset selections

To select a different cycle/ temp

Press ON/SELECT until the light glows by the	PRESS	YOU SEE
desired Cycle/Temp. Your dryer makes
selections for each Cycle/Temp. You can
change these selections if desired. See the
charts on pages 11 and 12 for the selection
you want to change.

Fire Hazard

Do not dry plastic or rubber items with heat. Use the Fluff Air cycle, or line dry. Failure to do so could result in fire or damaged items.

NOTES:

lThe last few minutes of all cycles are without heat to make the load easier to handle.

l To help reduce wrinkling, remove the load from the dryer as soon as tumbling stops. This is important for permanent press, knits and synthetic fabrics.

Page 10

Image 10

Whirlpool 3396304 Selecting cycles/temps, To select a different cycle/ temp, Press ON/SELECT until the light glows by

Contents

Electronicgas and Electricdryers Serial Number Dealer Your safety is important to usThank you for buying a Whirlpool@ appliance Purchase Date Understanding Safety What to do if YOU Smell GAS Important Safety Instructions Understanding your responsibilities Other features not shown FeaturesUser Cards This Section Using the electronic touch controlsBefore starting your dryer One tone if the dryer accepts your selection Your dryer Stopping and restartingCydesITemps Using Automatic drying Press Select Using Timed drying Until the light glows by the CycleITemp desired To select a different cycle/ temp Selecting cycles/tempsPress ON/SELECT until the light glows by Cycle chart Cotton and Llnens Rubber, Plastic or Heat Sensltlve items Fluff Air-No HeatSee Warning on Option Selection Chart Using Your Options/FeaturesUsing Cycle Signal Finish Guard Options Options Status Lights Using the Lockout featureUnderstanding the Finish Guard cycle To lock/unlock control panel Lint signal Maintenance-every loadCleaning the lint screen Caring For Your Dryer Cleaning the dryer interior Maintenance-as neededCleaning a clogged lint screen Cleaning the dryer exterior Changing the drum light ElectrIcal Shock and Fire Hazard Removing accumulated lint Wire clips see View C or damaging wires Electrical powerAgainst side of dryer. Avoid disconnecting Vacuum cleaner. Avoid damaging wires Drying tips Before you dryThis Sorting Drying special-care items Pillows, stuffed toys Dlapers, baby clothes Elastic Items Saving energy Using dryer fabric softenersVacation care Enough Detergent Was used Solving laundering problemsWere Dried Llnt Lint screen is clogged Load Is properly Below 45F 7C Dryer To Installation Instructions Lint screenMoisture in the load to be Duct or outside Before calling for assistance If You Need Assistance Or ServiceIs the dryer door firmly closed? ’ When asklng for help or servlce If you need service’If you are not satisfied with how the problem was solved If you need assistance Full ONE-YEAR WARRANlY From Date of Purchase Defective in materials or workmanship

Whirlpool 3396304 warranty Selecting cycles/temps, To select a different cycle/ temp

Models: 3396304

Selecting cycles/temps

To select a different cycle/ temp

Press ON/SELECT until the light glows by the