Maintenance instructions:
Clean lint screen after each cycle.
Removing accumulated lint:
From inside the dryer cabinet:
Lint should be removed every 2 years or more often,
depending on dryer usage. Cleaning should be done by a
qualified person.
From the exhaust vent:
Lint should be removed every 2 years, or more often,
depending on dryer usage.
If dryer does not operate check the following:
Electric supply is connected.
Circuit breakers are not tripped or fuses are not blown.
Door is closed.
Controls are set in a running or “ON” position.
START button has been pushed firmly.
For gas dryers, check that gas supply shutoff valves are set in
open position.
If you need assistance:
The Commercial Laundry Support Center will answer any
questions about operating or maintaining your dryer not covered
in the Installation Instructions.
Just dial 1-800 NO BELTS (1-800-662-3587) — the call is toll free.
When you call, you will need the dryer model number and serial
number. Both numbers can be found on the serial-rating plate
located in the dryer door well.
8577213C
©2010 06/2010
All rights reserved. Printed in U.S.A.
Keep area around dryer clear and free from combustible
materials, gasoline, and other flammable vapors and liquids.
Keep dryer area clear and free from items that would obstruct
the flow of combustion and ventilation air.
® Registered Trademark/TM Trademark of Whirlpool, U.S.A., Whirlpool Canada LP Licensee in Canada