Whirlpool 8900 manual Signal lights

Hi-Temp Wash option

If the Hi-Temp Wash option is selected, water is heated in the dishwasher during the main wash of the Heavy Wash, Normal Wash, Light Wash and China Crystal cycles to improve washability. The Hi-Temp Wash option is automatically selected for the Pots

&Pans cycle. See “Cycle selection chart” on pages 8-10.

Lo-Energy Rinse option

If the Lo-Energy Rinse option is selected, water is not heated in the dishwasher during the final rinse of the Heavy Wash, Normal Wash, Light Wash and China Crystal cycles. The Lo-Energy Rinse option cannot be selected with the Pots & Pans cycle. See “Cycle selection chart” on pages 8-10.

NOTE:This option will reduce the amount of electricity used to run the dishwasher, but may result in slower drying and some spotting on dishes. For best drying and rinsing results, use a liquid rinse agent.

Air	Dry	option
If the	Air	Dry option is selected, air in the	SELECT

dishwasher is not heated during the “dry” part of the cycle. Using this option helps save energy, but dishes take longer to dry (overnight) and some water spotting may result. Some items (such as plastics) may need towel drying. For best drying results, use a liquid rinse agent.

The signal lights

Delay signal light

The DELAY signal light will glow when a delay start time has been set. It will also glow while the dishwasher has paused to heat water (see above).

Water heating signal light

The WATER HEATING signal light will glow while the dishwasher is heating water for a cycle. See cycle selection chart on pages 8-10.

Clean signal light

The CLEAN signal light will glow when a washing cycle is complete. To turn it off, turn the Cycle Control knob clockwise slightly until the light goes off.