Cleaning Your Spa
Your Razza Plus spa shell consists of two layers of
plastic materials. Its smooth top surface of acrylic is
tough and durable and contains concentrated color.
This is supported by a substantial thickness of fiber-
glass-reinforced polyester resin. A catalyst causes a
chemical reaction during manufacture that bonds these
layers permanently into a hard, strong material. With a
minimum amount of care and cleaning, your whirlpool
spa will look new for years.
To clean your spa, simply use a mild, non-abrasive
liquid detergent, isopropyl alcohol, or commercially pre-
pared spa cleaner. Do not use abrasive cleaners. You
can protect and restore the gloss to a dulled surface by
applying Meguiar’s #10 Mirror Glaze, which is a product
specifically designed for use on acrylic finishes. If
Meguiar’s is not available, an acrylic polish of equal
quality or automotive paste wax will do.
Use a spa cleaner for residue buildup at the water
level of the spa surface. This may be applied to the
acrylic surface with a soft cloth and wiped clean. Use
sparingly in small amounts to avoid contaminating the
spa water. If heavily soiled, it may be advisable to lower
the water level 2-3 inches before cleaning; then refill to
normal level.
Covering Your Spa
An optional rigid spa cover is available to place on top
of the spa. Use of this cover will help to minimize heat
loss and evaporation, and thus reduce energy costs.
The cover is also an attractive and efficient means of
preventing debris such as leaves and dirt from entering
your spa when not in use. Follow the instructions for use
and care provided with the spa cover.
CAUTION: While the spa cover is rigid, it is not
designed to support any weight. Therefore, as a
safety precaution and to preserve the life of your
cover, you must not sit, stand, or lie on it; nor should
you place objects of any kind on top of it.
Jacuzzi Whirlpool Bath does not guarantee or war-
rant this cover. Refer to the spa cover manufacturer's
information provided with the cover.
Spa Light
Colored filters are provided with your spa. To change
a filter, simply pull the filter out of the fitting and replace
it with the desired colored filter. Replacement bulbs
(#912) are also included. Put them in a safe place for
future use. When a bulb burns out, replace it from the
back of the light fitting, pulling out the bulb receptacle.
Repairs to the Acrylic
Minor scratches which do not penetrate the color
finish (acrylic) can be removed with 600-grit wet/dry
sandpaper. Restore the glossy finish with Meguiar’s #10
Mirror Glaze or comparable automotive paste wax.
Major scratches or gouges which penetrate the acrylic
surface will require refinishing. Ask your Jacuzzi Whirl-
pool Bath dealer for special instructions.
LIGHT BULB
REPLACEMENT
15
RAZZA SPA WITH
OPTIONAL COVER
LIGHT BULB
NORMAL
LENS
COLORED
FILTER
LIGHT
BEZEL
SHELL
BULB
RECEPTACLE
LOCKING
NUT
MAINTENANCE