HOW TO START AND USE
YOUR AIR CONDITIONER
For Exhaust Control
EXHAUST
CONTROL
FAN SPEED
FAN
The Exhaust Control setting draws stale or smoky air from the room.
1l To exhaustroom air
Set exhaust control to OPEN. Adjust fan
CONTROL
SPEED/
HEAT CONTROL
control to speed desired. If no cooling is desired, use FAN ONLY setting.
THERMOSTAT
CONTROL
Be sure air conditioner is OFF before plugging it in.
NOTE: Exhaust Control not available on Models ACE664 and ACW664.
To Start Your Air Conditioner
1l Set exhaust control to OFF for maximum cooling or heating.
2l Choose a fan speed setting for cooling or heating.
LO COOL . . . . . . . . . for sleeping comfort
HI COOL . . . . . . . . for maximum cooling
LO HEAT.. . . . for reduced air movement with heat
OPEN
FAN ONLY
2. To circulateroom air
Set exhaust control to CLOSED. Adjust fan control to FAN ON LY.
CLOSED
FAN ONLY
HI HEAT . . . for maximum air movement with heat
3l Turn thermostat control to Number 6 (mid- setting). You can adjust the air conditioner’s per- formance by resetting the thermostat control to a higher number for maximum cooling. Lower the number setting for less cooling. You will need to experiment to find the setting which suits you best.
ChangingAir Direction
The louvers in the grille area at the top of the air conditioner control the direction of the cooled air.
Move the tabs at the bottom of the grille to the right, left or straight ahead. Simply move the levers in the direction you want the air to go (see Figure 8).
8
