For Your Air Conditioner, Through-the-wall

for Your Air Conditioner

Through-the-wall	1l Unpack accessory parts shipped with cabinet
	(see Figure 3) before installing your air
Installation Instructions	conditioner.

2. Pick the right wall. First, decide what room(s) vou want to cool. Then choose a wall that

will allow the air-conditioned air to flow freely and directly into the room(s) you want

cooled. Remember, it’s difficult to move air

around corners. Choose a location that’s

also near an electrical outlet. (Refer to the

ELECTRICAL REQUIREMENT pages for

type of receptacle and wiring needed.) Do

not use an extension cord. CAUTION: DO

NOT LOCATE AIR CONDITIONER WHERE

PLASTIC CABINET FRONT WILL BE

EXPOSED TO A HEAT SOURCE THAT

RAISES THE SURFACE TEMPERATURE

IN EXCESS OF 120°F.)

CAUTION:

Be sure air conditioner does not fall out of window during installation.

Handle the air conditioner with care. Watch out for the sharp metal fins on the front and rear coils.

lDo not use the collected water for drinking purposes. It is not sanitary.

3. Remove hardboard panel by removing the two screws holding hardboard panel to front of cabinet (see Figure 4). Release panel by in-

serting finger in service-cord opening on left side of cabinet and pushing outward. Install

cabinet using installation instructions on hardboard panel.