Installing side curtains
WARNING
Excessive Weight Hazard
Use two or more people to move and install air conditioner.
Failure to do so can result in back or other injury.
Attach curtains to unit before placing unit in window.
1.Remove unit from packaging.
2.Locate supplied bag of 6 screws.
3.Insert top and then bottom of right curtain housing (A) in top and bottom curtain guides (B) on air conditioner.
A
B
back view
A
B
bottom view
4. Extend right curtain outward so you may insert the first | C |
screw (C) through the middle hole of the curtain. Screw |
|
curtain to middle hole in air conditioner cabinet. This screw |
|
is required to correctly attach curtain (top to bottom) to the |
|
air conditioner cabinet. |
|
5.While the right curtain is still extended, insert another screw
(C) in top slot of curtain. Screw curtain to top hole in air conditioner cabinet.
6. While the right curtain is still extended, insert another screw
(C) in bottom slot of curtain. Screw curtain to bottom hole in air conditioner cabinet.
7.Slide curtain housing into guides as far as it will go.
8.Repeat above steps for left curtain, then go to “Positioning the air conditioner” below.
Positioning air conditioner in window
WARNING
Excessive Weight Hazard
Use two or more people to move and install air conditioner.
Failure to do so can result in back or other injury.
1.Using two people, lift air conditioner into place.
NOTES:
•Handle air conditioner with care.
•Air conditioner should be placed no more than 4 ft (122 cm) from a grounded outlet.
2.Center air conditioner in window. Check that lower rail of air conditioner is behind and against back side of window seal. Lower window sash (A) to hold cabinet in place.
NOTES:
•Do not block the louvers in the front panel.
•Do not block the openings on the outside of the air conditioner.
3.Check that air conditioner cabinet is tilted to the outside so that water will run to the outside. There should be a tilt to the outside of about 1/2 bubble (B). If cabinet is not properly positioned, reposition or shim cabinet to provide the proper tilt.
A
1/2 bubble tilt
B
6
