Whirlpool ACSIOZ ACS520 warranty Outside odgo

6.Place platform aeeembly, with platform tab against inside of window track, and attach it to the window jamb. Use appropriate length screws (item C on page 7).

7.Adjust the platform aeeembfy so that the outside edge is %-inch lower than the inside edge. This ensures proper water drainage from the air conditioner.

8.Level the platform aeeembly from side- to-side. Also, make sure the window track is level. Use leveling shims as necessary to ensure the air conditioner will be level from side-to-side.

9.Measure the height of the window opening from the top of the platform assembly. Subtract 20% inches (the height of the air conditioner cabinet). Mark this measurement on the plastic window paneC along the longer side.

10.Clamp the plaetic window panel between a board and a work table and cut along the cutting line with a fine tooth saw. Remove any burrs with a file.

11.Lift the panel frame from the side channels of the air conditioner cabinet. Slide the plastic window panel into the frame with the smooth side to the outside. Slide the panel frame assembly back into the side channels of the air conditioner cabinet. Make sure the plastic window panel is firmly enclosed on all sides by the retainer grooves.

Outside odgo

is %-in& loww nlul

inoido. +

Put platform

Measure bebnco md subtract

20% in&se.

10