12.Cut l kle channel eeal into 2 equal lengths. Remove the protective backing and apply it to the rear side of the cabinet side channels, starting just below the panel frame assem- bly. Pinch off excess length so the seal is even with the bottom of the cabinet side channel.
13.Remove the air intake penel and front Panel frame First, press down on the top edge of the air intake panel and tilt it toward you. Lit it up to release the bottom spring clips. Next, remove the 2
NOTE: Do not push or pull on the air direction louvers.
14.Piece the air conditioner in the window opening. It should sit on the platform assembly so that the window panel frame and the cabinet side channels are against the top and side window jambs.
Apply
3.Promsdown and tilt forward to remove front penal fmmo.
l.Preudown
11
