Programming the AUTO START function on the remote control
The AUTO START function lets you program the air conditioner to turn on and cool the room to a set temperature at any time you choose-whether you are home or not.
To program AUTO START:
1.Make sure the clock Is set to the correct time of day. (See “Settingthe clock on the remote control” on page 9.)
2.Press the AUTO START SET pad.
NOTE: If the clock has not been set prior to pressing the AUTO START SET pad, the remote control will default to the Clock Set mode.
3.Use the TIME A (up) or V (down) pads to set the desired start time.
4.Select an operating mode, fan speed and temperature. (See “Startingthe air condi- tioner using the remote control” on page 6 for more information.)
5.Press the AUTO START SET pad again to save your program settings.
This example shows the AUTO START function to be programmed to turn on at 3:00 PM and to use the CCCL mode at HIGH fan speed to cool the room to 7O’F.
6.Press the AUTO START ON pad to enable your start time program in the air condi- tioner. You will hear a confirmation beep.
NOTE: Your program is repeated every day at the set start time. If, at any time, you want to check or change the program, press the AUTO START SET pad.
10
