2.Select a fan speed by pressing the corres- ponding pad. The name of the pad you press will appear in the display.
AUTO | For unit to select fan speed |
| required to reach selected |
| temperature setting |
HIGH | For maximum air movement |
MED | For normal air movement |
LOW | For minimum air movement |
NOTE: When changing from one operating mode to another, the remote control retains the fan speed from the first mode until a different fan speed is selected in the new mode.
3.For COOLI or FAN* modes: Set the temperature by pressing the TEMPA (up) or V (down) pad(s) until the desired temperature shows in the display.
To change the display from “Fto “C(or from “Cto “F)press the TEMP V pad. While holding in the TEMP V pad, press the TEMP A pad.
The OFF pad
The OFF pad turns the remote control and the air conditioner off. Pressing the OFF pad will not turn off the AUTO START and AUTO STOP functions.
The transmit symbol
This symbol shows you that your selection has been transmitted to the air conditioner. You will also hear a confirmation beep from the unit.
7
