Using the Fresh Air and Exhaust Control
This control setting draws stale or smoky air from the room. It can also draw fresh air from the outside into the room.
1. To exhaust room air
Set exhaust control to EXHAUST. Set fan
control to speed desired. Set fan control to FAN ONLY if no cooling is
desired.
20To bring in outside air
Set fresh air and exhaust control to FRESH AIR.
Set fan control to
FAN ONLY.
1. Move the tabs at the bottom of the grille to the right, left or straight ahead. Simply move the levers in the direction you want the air to go (see Figure 25).
2l On some models, air flow can be directed up or down. Move the tab in the center louver to direct air.
Cleaningand Caring For Your Air Conditioner
Proper use and care of your air conditioner will help insure longer life and lower operating costs.
Follow these instructions carefully. Call your dealer for an annual checkup.
3. To circulate room air
Set fresh air and exhaust control to OFF. Set fan control to
FAN ONLY.
ChangingAir Direction
The louvers in the grille area at the top of the air conditioner control the direction of the cooled air.
Cleaningof Front Panel
If the front panel of your unit looks like the one shown in Figure 26, follow these instruc- tions.
1l Remove the front panel from unit when cleaning. Press down at top edge of the front as shown in Figure 26.
2l When the front moves away from top of cabinet, pull top of front toward you.
3l Lift up and away from the bottom spring clips.
15