INSTALLATION INSTRUCTIONS
for Your Air Conditioner
If you have these parts, follow:
INSTALLATION
INSTRUCTION 1 (below).
u Installation Instructions
for
INSTALLATION INSTRUCTION 2
(on page 12).
1l Unpack accessory parts (see Figure 3) be- fore installing your air conditioner. A normal installation can be made with a screwdriver, a drill, saw, small level, pocket knife, 7/16” socket wrench, l/8” drill bit and tape measure.
WINDOW LOCK
CAUTION:
lBe sure air conditioner does not fall out of window during installation.
l Handle the air conditioner with care. Watch out for the sharp metal fins on the front and rear coils.
lDo not use the collected water for drinking purposes. It is not sanitary.
WE” WIDE)
4 SHEET | 7 SHEET | 3Wb |
|
|
| ||
METAL | SCREWS | METAL | SCREWS | SCREWS | u | 5 FLAT | 6 NUTS |
(#8X3/8” | (rlOX112” | (qloX3/4” | WASHERS |
| |||
|
| ||||||
ROUND | HEAD) | HEX | HEAD) | ROUND HEAD) |
|
|
|
2. Pick the right window. First, decide what room(s) you want to cool. Then choose a window that will allow the
7
