Whirlpool CAW21D2A1 manual Electrical Requirements, Chart-D, Receptacle Wiring

RECOMMENDED GROUNDING METHOD

For your personal safety, this appliance must be grounded. This appliance is equipped with a power supply cord having a 3-prong grounding plug. To minimize possible shock hazard, the cord must be plugged into a mating 3-prong grounding type wall receptacle, grounded in accordance with the National Electrical Code and local codes and ordinances. If a mating wall receptacle is not available, it is the personal responsibility and obligation of the customer to have a properly grounded 3-prong wall receptacle installed by a qualified electrician.

ELECTRICAL

REQUIREMENTS

For 230 volt and 230/208 volt models with serial plate amperes up through 24.0

Refer to Chart D for specific wiring and receptacle information to be used.

OBSERVE ALL LOCAL GOVERNING CODES AND ORDINANCES.

Do not, under any circumstances, remove the power supply cord ground plug.

ELECTRICAL GROUND IS REQUIRED ON THIS APPLIANCE.

A three-wire, single-phase 60 hertz AC only electrical supply is required.

A separate electrical supply is required on a separately fused circuit. Do not fuse ground- neutral.

See Chart D for receptacle voltage require- ments, proper fuse size, wire and wiring connections which must conform with rating of the appliance. Do not use an extension cord.

Chart-D

		RECEPTACLE
PLUG	AND	VOLTAGE
RECEPTACLE		(60	HERTZ			SERIAL PLATE
DATA		AC	IN ALL			AMPERES
		INSTANCES)
RECEPTACLE	_	MODEL		WITH
		SERIAL		PLATE
		OF 230		VOLTS
		(207	MIN,253			“P
		MAX.)
						through
					1
						24.0
		MODEL		WITH
		SERIAL		PLATE
		OF 2301209
		VOLTS
		(197.6		MIN-
		253	MAX.)
USE TIME-DELAY		MINIMUM				TYPE
FUSE
		RECEPTACLE
OR TIME		WIRE		SIZE		OF BRANCH
DELAY	CIRCUIT					CIRCUIT
BREAKER		SEE BELOW
RATING IN
AMPS
CART.		10 GAUGE				SINGLE
TYPE		USE COPPER				OUTLET
ONLY						ONLY
		WIRE		ONLY

RECEPTACLE WIRING

RECEPTACLE WIRING should be at least as large as size shown on electrical Chart D. Use copper wire only. It is the personal responsibility

and obligation of the customer to provide proper and adequate receptacle wiring installed

by a qualified electrician.OBSERVE NATIONAL

ELECTRICAL CODE A:\ID ALL LOCAL

GOVERNING CODES AND ORDINANCES.

RECOMMENDED GROUNDING METHOD

For your personal safety, this appliance must be grounded. This appliance is equipped with a power supply cord having a 3-prong grounding plug. To minimize possible shock hazard, the cord must be plugged into a mating 3-prong grounding type wall receptacle, grounded in accordance with the National Electrical Code and local codes and ordinances. If a mating wall receptacle is not available, it is the personal responsibility and obligation of the customer to have a properly grounded 3-prong wall receptacle installed by a qualified electrician.